BRASS POST HANGER SET WITH TIP RING (OG018LG) ART GLADIUS
This set comes with 2ea polished female threaded brass posts, 3ea polished brass male threaded base nuts, 1ea brass tip ring, and 3ea counter sunk screws (note: heads of screws are smaller in diameter to the post and tip ring shafts). One assembled the posts will extend 1-15/16 inches from the mounting surface. The tip ring will extend 1- 5/16" from the mounting surface.

To install: First established the desired distance that you want between your posts for your specific sword, mark a dot on your wall or plaque where to drill a pilot hole. Then use both a level and rulers to accurately mark the second pilot hole position. Once the pilot holes are drilled, secure the base nuts to the mounting surface (threads up) by using the counter sunk screws provided. When base nuts are in place, screw on the posts to each nut hiding the screw heads and hand tighten to a snug fit. Mount your sword on the posts and mark position and secure the Tip Ring at the Swords point to hold it securely in place. Voila! You can now vertically display your sword in beautiful elegance!

• Overall Post Length w/ base nut: 1-15/16”

• Inside Post Length w/ base nut: 1-7/8”

• Post Head Diameter: 7/8"

• Post Shaft Diameter: 3/8"

• Tip Ring Inside Opening Width: 3/4"

• Tip Ring Length w/ base nut: 1-5/16”

• Set Weight: 2.4 oz

Polished Brass Post hangers are an elegant way to hang your sword or medieval weapon. They can be set directly in a wall or plaque and fit precisely to match the width of your sword blade or the curvature and complexity of its hand guard.